Ultrasound Doppler Flow Controller and Pumping Systems
ATS 700-D 115V

Ultrasound Doppler Flow Controller and Pumping Systems<br />ATS 700-D
Ultrasound Doppler Flow Controller and Pumping Systems
ATS 700-D
Item# 700-D-115
$6,838.20
Additional Doppler Test Fluid: 

Product Description

Free Shipping (Continental United States Only)



The Model 700-D Doppler Flow Controller and Pumping System, when combined with an appropriate phantom provides an easy and accurate means of evaluating an ultrasound Doppler imaging systemís ability to detect sensitivity at varying depths, maximum penetration, flow velocity, location and directional discrimination.

Model 700-D consists of a variable speed positive displacement pump, flow integrator, in-line flow meters, and a test fluid reservoir. The Model 700-D is used with an appropriate phantom such as the ATS Doppler Flow Phantoms Models 523, 523A, 524, 525 and 527 (these products are available as a separate purchase) and Model 707 Doppler Test Fluid.

The System provides steady-state flow ranging from 20 to 950 ml/minute. Higher flow rates are available upon request. The speed of the pump is controlled by one knob. Two In-line flow meters continuously monitor the flow rate of the blood mimicking test fluid through the phantom during the test procedure. The large capacity test fluid reservoir insures the fluid pumped through the phantom will be free of air bubbles even after hours of continuous use.

Warranty: Three months.


Set-up Diagram

Specifications

Pump and Controller
RPM Range 6-600
Pump Heads 2
Control/Power Switch Forward/Off/Reverse
Speed Control Knob 1-Turn Potentiometer
Fluid Contact Tubing Only
Self-Priming Up to 2.0 m (6.5-Ft.)
Run Dry Yes, continuously
Non-siphoning Yes
Flow Rate 20 - 950 ml/min
Domestic Voltage 90-130 VAC 50/60 Hz
Pump Head Tubing Silicon, 3.1 mm (1/8") I.D.
System Tubing PVC 6.4 mm (1/4") I.D.
PVC 10 mm (13/32") I.D.
Flow Meters
Number 2
Flow Range 2.0 - 974 ml/min
Accuracy 2% of reading
Repeatability 1%
Fluid Reservoir
Type Heavy-duty bottle
Cap Inlet/outlet
Capacity 2 Liter (.5 gallon)
Weight/Dimensions*
Size 69 x 40 x 25 cm (27-1/2 x 16 x 10 in)
Weight 14 Kg (30 lb.)
*Includes carrying case with 2 Gallons of Doppler Test Fluid
Doppler Test Fluid
Model 707
Type Blood-Mimicking
Density 1.04 +/- 0.01g/cc
Viscosity 1.66 +/- 0.1 centistokes
Particulate size 30 micron +/- 3 micron mean diameter
Particulate concentration 1.7 +/- 0.1x104 particles per cc

*If you need the 230V model please contact sales@supertechx-ray.com about item number 700-D-230.

WARNING THIS PRODUCT IS NOT DESIGNED NOR INTENDED FOR MEDICAL USE IN TREATMENT OF PATIENTS AND, ACCORDINGLY, HAS NOT RECEIVED FDA APPROVAL AS A DEVICE FOR MEDICAL USES.

To see our full line visit our main website.
http://www.supertechx-ray.com